Showing all items for AdvanceQuip

Used 2014 CASE 2050M 23.0t Bulldozer. A low hour Bulldozer in great condition. This tractor is well specified with a 3.4m Semi-U Blade, Rear Rippers, Sweeps and Track Guards. Track Chains and Sprockets on this machine was replaced less than 100 hours ago. This unit runs the FPT 6.7L 232Hp engine and Hydrostatic Transmission. This model has industry-leading draw bar pull and great visibility. Hour Meter: 3,730 Hours (Machine still in work, so hours are subject to change)

2022 XCMG XE35U 4 ton Excavator done only 5 hours from new! This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Load-Sensing Pump. Special Price of $45,000.00+GST includes: A/Cond Cabin Extra Cab Guarding Steel Tracks Blade Dual Auxiliary Piping Hydraulic Hitch and 3 Buckets Anti-Drop Valves E-Stops Located Auckland

Used 2014 Sumitomo SH210-5 LC 21.0t Digger. A tidy and original, one-owner machine. This unit comes with a Hydraulic Coupler, Rock Bucket, Screen Guard and Track Guards. Located Christchurch

Used 2018 CASE CX17C 1.7t Compact Excavator. A tidy machine that has been well maintained from new. This machine is set up with Canopy, Hydraulic Expanding Tracks, Draw-Pin Hitch, Tilt Bucket, Dig Bucket and Trench Bucket. New Rubber Tracks just installed. Hour Meter: 1,660 Hours (Hours may change as machine still in work) We also have a 2018 Brian James 2,500Kg Plant Trailer available for an extra $5,000.00+GST. Located Gore

2022 XCMG XE35U 4 ton Excavator done only 12 hours from new! This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Load-Sensing Pump. Special Price of $45,000.00+GST includes: A/Cond Cab Rubber Tracks Blade Dual Auxiliary Piping Hydraulic Hitch and 3 Buckets Anti-Drop Valves E-Stops Located Auckland

Used Champion C80A Grader A very tidy example with low hours. This unit is specified as below: Cummins 4B39 80Hp Engine Hydrostatic Transmission 6,950 Kg Operating Weight 11 ft Moldboard Good Tyres Located Christchurch

Used 2006 Takeuchi TB1140 14.0t Digger. A tidy, low hour machine. This unit is set up with a Blade, Hyd. Hitch and Dig Bucket. A very good price for the hours. Located Christchurch

This is a tidy machine from a well-respected fleet. This unit is set up with a 4.6m3 GP Bucket with Bolt-on Cutting Edge, Loadrite Scales, Auto-Lube and near-new Tyres. A low hour machine ready to go to work. Located Auckland

A tidy, late model machine with good hours. This unit is set up with an Open Cab, Joystick Controls and NORM 4in1 Bucket. Machine Specifications: Engine: Perkins 404D-22T 60Hp Turbo Operating Weight: 2,950 Kg Machine Width: 1,524mm (Bucket 1,600mm) Lift Capacity: 1,036Kg (50% of Tipping Load) Located Queenstown

Used 2019 CASE CX145 CSR 14.5 ton Short Radius Excavator. A very tidy, one-owner machine with low hours. This unit is set up with a Blade, A2 Ram-Tilt Hydraulic Coupler, Wide Bucket and Dig Bucket. Located Gore We can arrange transport NZ-wide.