New & Used Equipment & Trucks For Sale in gore

A tidy, one-owner machine with good hours. This unit is set up with a Ram-Tilt Hydraulic Tilt Coupler and Dig Bucket. It is also specified with a Long Undercarriage with Track Guards and 600mm Grousers. Track Gear has approx. 70% life remaining. Available now.

Heavy duty 2m orchard mulcher

Bogballe M2W Fert Spreader 12m 42m spread width 1800 hopper capacity 2.9m hopper width Electric trend shift headland spreading to the boarder (std) E6 Vanes (Standard) for 24 36M* spread width...

Deutz-Fahr Agrotron TTV 630 Low hours and very tidy Engine: EngineDeutz TCD 2012 L6 4V turbocharged inter-cooled diesel 6-cylinder liquid-cooled 369.6 ci [6.1 L] Rated Power (ECE R24):203 hp [151.4 kW] Maximum Power (ECE R24):222 hp [165.5 kW] Rated RPM:2100 Oil change:500 h Standard tires (ag):Front: 480/70R30. Rear: 580/70R42 Optional tires (ag):Front: 600/70R30. Rear: 710/70R38 Front: 600/70R30. Rear: 620/70R42 Front: 540/65R34. Rear: 650/65R42 Front: 600/70R30. Rear: 650/65R42 Deutz-Fahr Agrotron TTV 630 Dimensions Weight:15930 lbs [7225 kg] Wheelbase:110.9 inches [281 cm] Length:189.3 inches [480 cm] Width:107.1 inches [272 cm] Height (cab):124.3 inches [315 cm] Deutz-Fahr Agrotron TTV 630 Power Engine (net):203 hp [151.4 kW] Deutz-Fahr Agrotron TTV 630 Mechanical Chassis:44 MFWD 4WD Differential lock:automatic front and rear differential locks Steering:power Brakes:wet disc Cab:Cab standard with air-conditioning. Mechanical or semi-active pneumatic suspension is optional. Deutz-Fahr Agrotron TTV 630 Hydraulics Type:load sensing Valves:4 to 7 Pump flow:29.1 gpm [110.1 lpm] 42.3 GPM [160.1 lpm] * Steering flow:11.6 GPM [43.9 lpm] Deutz-Fahr Agrotron TTV 630 PTO Rear PTO:independent Clutch:electro-hydraulic wet disc Rear RPM:540/540E/1000/1000E* Front RPM:1000* Engine RPM:1000@1960 1000E@1600 Deutz-Fahr Agrotron TTV 630 3 Point Hitch Rear Type:III/II Control:position and draft control Rear lift:22046 lbs [10000 kg]

Used but very minimal work PIONEER 140 The Celli fixed-width spike rotor harrow has solid boron spikes at an angle that penetrates ground using minimal power. Because it was first designed for stony ground, the machine can take rough conditions. The tailgate traps soil, so its released as a fine tilth. A suitable seedbed is often created in one pass. Features: Drive units designed and produced entirely by Celli enabling complete quality control over all componentry and workmanship Multi flange waterproof sealing system exclusively by Celli to give rotor bearings full protection from water, dirt, wire and other foreign material Steel face to face rotor seals for longer lasting rotor bearings Robust headstock for a stronger, longer lasting rotary hoe Box section body for rigidity and long life Oil filled rotor bearings for low maintenance and guaranteed lubrication Four speed gearbox rated up to 140 hp Swinging lower links Gear side drive 250mm working depth Side skids Two piece adjustable, spring loaded frangor tailgates Slip clutch

Used Komatsu D65P-11 19.0t Bulldozer. A straight and tidy machine. This unit is set up with a Straight Blade, Drawbar and Cabin. Sound Track Gear with approx. 40% life remaining. Ready to go to work. Located Auckland

Kirpy Extremely Heavy Duty Ripper 3m Wide 9 Legs

Fransgard 2.8m Disc Mower

Used 2018 CASE CX17C 1.7t Compact Excavator. A tidy machine that has been well maintained from new. This machine is set up with Canopy, Hydraulic Expanding Tracks, Draw-Pin Hitch, Tilt Bucket, Dig Bucket and Trench Bucket. New Rubber Tracks just installed. Hour Meter: 1,660 Hours (Hours may change as machine still in work) We also have a 2018 Brian James 2,500Kg Plant Trailer available for an extra $5,000.00+GST. Located Gore