Showing all items for AdvanceQuip

2022 XCMG XE17U 1.7 ton Excavator done only 28 hours from new! This machine runs a Kubota D902 15.8 Hp Engine and XCMG Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: Canopy Rubber Tracks Blade Hydraulic Expanding Undercarriage 990mm/1,240mm Manual Quick-Hitch 900mm Wide Bucket 450mm Dig Bucket 300mm Trench Bucket Attach2 Mini-Tilt Hitch available for an extra $3,200.00+GST incl. installation. Located Auckland

2022 XCMG XE35U 4 ton Excavator done only 5 hours from new! This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Load-Sensing Pump. Special Price of $45,000.00+GST includes: A/Cond Cabin Extra Cab Guarding Steel Tracks Blade Dual Auxiliary Piping Hydraulic Hitch and 3 Buckets Anti-Drop Valves E-Stops Located Auckland

Used 2006 Takeuchi TB1140 14.0t Digger. A tidy, low hour machine. This unit is set up with a Blade, Hyd. Hitch and Dig Bucket. A very good price for the hours. Located Christchurch

Used Hitachi ZX240LC-3 25.0t Excavator. A tidy and original, one-owner machine. This unit comes with a Rock Bucket only. Also comes with Side Guarding as well as a Roof and Screen Guard. Good track gear. Located Christchurch

2012 KOBELCO SK135SR 13.5t Excavator This machine is well set up with a JB Power Tilt Hydraulic Coupler, Wide Bucket, Dig Bucket and 700mm Grousers. Some panel rust showing. Being sold as traded. Hour Meter: 8,127 Hours Located Auckland

Used 2017 SUMITOMO SH80BS-6A 8.0t Excavator. A tidy, late model machine. This Short Radius unit is set up with a Slew Boom, Blade, Steel Tracks with 450mm Grousers, Ram-Tilt Hydraulic Coupler, Wide Bucket and Dig Bucket. Hour Meter: 2,663 Hours (Hours may change, as machine still in use) Located Gore

Used 2020 CASE CX60C 6.0t Digger A very tidy, late model machine. This Short Radius unit is set up with an A/Cond Cab, Slew Boom, Blade, Rubber Tracks, Hydraulic Coupler, Tilt Bucket, Dig Bucket and Trench Bucket. Hour Meter: 1,560 Hours (Hours may change, as machine still in use) Located Gore

Used 2014 CASE 885B 20.0t Grader. A very tidy machine with low hours. This unit is well set up with: 14ft Moldboard Rear Rippers with Scarifiers Michelin 17.5-R25 Tyres Front Blade also available (not installed) A full Leica 3D System was installed on this machine in 2022 at a cost of $80,000.00+GST. This is available for an extra $55,000.00+GST over and above the asking price, or can be removed if not required. Located Gore

Used 2005 Hitachi ZX200 20.0t Excavator. This is a tidy machine that is well set up with External Cab Guarding, Long Undercarriage with 600mm Grousers and Track Guards, Hydraulic Hitch and Dig Bucket. Very tidy and original condition. Located Auckland

Used 2022 ASV RT50 Compact Track Loader A very tidy, late model machine with low hours. This unit is set up with and Open Cab, Proportional Joystick Controls and NORM 4in1 Bucket. Machine Specifications: Engine: Kubota 50Hp Operating Weight: 2,450 Kg Machine Width: 1,490mm (Bucket 1,550mm) Hour Meter: 619 Hours (Machine still in work, so hours may change) Located Gore