Showing all items for FARMCHIEF MACHINERY LTD

2008 year New Plastic bed New jack Bottom cleats on rotor Free Flow wiper panel Fully workshop checked LOCATION: CHRISTCHURCH STOCKNO: UM43108

2012 model. 3.0m working width Approx. weight 1080kg 26 HD cast hammer flails Dual fixed skids Rear adjustable roller High clearance to allow large amounts of product through Save $10000 on new price LOCATION: CHRISTCHURCH STOCKNO: UM43222

2.50m working width 52 cast steel hammer flails 1000kg approx 100+ HP required Steel belted protected roller bearings Double-skin protection cover for an extended lifetime Cast steel hammer flails can easily deal with most trash found on the farm Solid 200mm rear roller with scraper LOCATION: CHRISTCHURCH STOCKNO: ZZ14531

2008 year near new wide wheels HD drawbar cleats on bttm rotor Free Flow wiper panel extra wind guards fitted Fully workshop checked LOCATION: CHRISTCHURCH STOCKNO: UM42893

18' (5.5m) length 24" (610 mm) propeller. Double joint in oil bath for low maintenance and articulation with #77 double joint Easy access for maintenance of the driveline joint Low maintenance gearbox protected by our 3 seal system on each shaft to protect against contamination. 6" (150 mm) directional valve for either agitation or transfer of manure. It can be operated while pump is at low RPM Wide operating range anti-swirl agitation nozzle with 320 horizontal rotation and 130 vertical articulation 4" (102 mm) adjustable nozzle Double-hinged articulation on agitation nozzle for constant flow with less restriction Impeller housing made of Abrasion Resistant steel. 26" (660 mm) impeller. Remote Grease Line Kit to lubricate the bearing housing without removing the pump Full Hydraulic Control Selling "As traded" LOCATION: CHRISTCHURCH STOCKNO: UM42857

13 x Heavy Duty 150mm wide HD sprung tynes and solid legs HD Grubber with lively action for finer finish HD reversibles points for good trash burying 3mtr working width to cover the ground fast Suit 100 to 180hp depending on the depth being worked. LOCATION: INVERCARGILL STOCKNO: UM43232

Vanguard 5.5HP Motor Approx 900L capacity c/w pump, filter, hose and nozzle LOCATION: CHRISTCHURCH STOCKNO: UM42928

4.6m working width Adjustable cut Front hydraulic adjustment ram 510mm Blades New rear 600mm DD Packer Rear drawbar 2 pairs of rear remotes Large 500/50-17 Vredestain Flotation Tyres LOCATION: CHRISTCHURCH STOCKNO: UM43068

Kuhn EL 162-300 Rotary Hoe with fine tilth knife rotor Working width of 3mtrs/10ft 540 Rpm input for a rotor speed of 235/277rpm 1000 Rpm input for a rotor speed of 258/361/236/296/160 rpm Suited to tractor 100 to 170hp Gear drive and PTO torque protection Good order. One owner from new LOCATION: INVERCARGILL STOCKNO: UM43119

16 Run/150mm spacing 2.4mworking witdth Front cutting discs Very tidy condition LOCATION: INVERCARGILL STOCKNO: UM43186