Tillage AND Seeding For Sale from $10,000 to $50,000 in Canterbury

Heavy Duty Tandem Discs 12ft 3.6mtrs wide Blades at 230mm Spacing 650mm on front and 620mm on rear Hydraulic cut adjustment Heavy duty traction 11.5/80-15.3 tyres 14ply Triple bearing per axle for added support Rear hitch Sprung drawbar and swivel Tow eye LOCATION: INVERCARGILL STOCKNO: UM43018

Sows seeds at exact quantities, with precise spacing and depth. With the air vacuum, the seed is perfectly and gently metered A double disc planter. The disc blades cut in groove and the seed is placed in the protected shadow of the discs. The visible seed singulators work from both the inside and the outside of the seed line and are easily adjustable with levers. 4m sowing width 3.5m transport width with hydraulic retractable end units Popular model Very accurate and have a strong reputation for reliability. LOCATION: INVERCARGILL STOCKNO: UM42960

KUHN HR3004 3mtr Power harrow One owner in mint condition On original tynes Rear Levelling board Maxi packer rear roller for firm finish and depth control Friction clutch Pto protection 1000rpm Very popular and respected model. Never available this tidy LOCATION: INVERCARGILL STOCKNO: UM43227

Good heavy 4.5m set of Simba discs. Blades are 680mm so plenty of life left in them. Two point linkage for tight turns and rear drawbar for towing roller or harrows etc.

Triple box 3.0m trailing Aitchison tine drill with opening discs. The 20 tines are spaced at 150mm and the points are in good condition with plenty of life left in them. We have just put new openin...

Ideal finishing cultivator with firm level finish 5.3mtrs wide working width 530mm diameter double ridge Cambridge ring and breaker ring. Fine finish, good tilth and self cleaning Heavy Duty 70mm axle 420mm Niaux scalloped discs mounted on rubber duratorque 3pt Linkage hitch Good order LOCATION: INVERCARGILL STOCKNO: UM42999

Heavy Duty Water Filled Roller 3/4" Plate Thickness 3mtrs/10foot rolling width x 1.5mtrs/5foot diameter Split rollers great for easier turning and less scuffing LOCATION: INVERCARGILL STOCKNO: UM43189

3.6m sowing width 29 Coulters Heavy Duty time Single box Near rear finger tines E-Drive Calibration Rear drawbar Immaculate order Save $$ on New LOCATION: CHRISTCHURCH STOCKNO: UM43195

Knife blades for excellent penetration into hard ground, bury trash Phased blade timing for lower power requirement and smoother running One pass to a fine seed bed Central Gearbox with drive to center of rotor, Less moving parts and extra bearing support No side Drive Reduces overall width close to working width Spring loaded rear tail door Rear levelling bar with adjusters and linked to rear roller P.T.O Drive shaft with Friction slip clutch LOCATION: INVERCARGILL STOCKNO: UM43176

3.5m working width Auto-reset legs Solid tines Reversible plough tip point 280mm spacing 13 tines Rear Vertical tillage Double Wavey Discs Only done 300ha Save$$ on new LOCATION: CHRISTCHURCH STOCKNO: UM43329