Used Equipment & Trucks For Sale from $10,000 to $50,000 in gore

Used but very minimal work PIONEER 140 The Celli fixed-width spike rotor harrow has solid boron spikes at an angle that penetrates ground using minimal power. Because it was first designed for stony ground, the machine can take rough conditions. The tailgate traps soil, so its released as a fine tilth. A suitable seedbed is often created in one pass. Features: Drive units designed and produced entirely by Celli enabling complete quality control over all componentry and workmanship Multi flange waterproof sealing system exclusively by Celli to give rotor bearings full protection from water, dirt, wire and other foreign material Steel face to face rotor seals for longer lasting rotor bearings Robust headstock for a stronger, longer lasting rotary hoe Box section body for rigidity and long life Oil filled rotor bearings for low maintenance and guaranteed lubrication Four speed gearbox rated up to 140 hp Swinging lower links Gear side drive 250mm working depth Side skids Two piece adjustable, spring loaded frangor tailgates Slip clutch

-

Kverneland RO-M 3PL Spreader Very tidy machine

Used 2022 XCMG XE35U 4.0 ton Excavator. This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 108 Hours (Machine still in use, so hours may change) Located Gore This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 200.4 Hours (Machine still in use, so hours may change) Located Gore

Used 2022 XCMG XE27U 2.7 ton Excavator done only 114 hours from new! This machine runs a Kubota D1105 20.9 Hp Engine and XCMG Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: Canopy Rubber Tracks Blade Dual Auxiliary Piping Hydraulic Hitch 1,200mm Wide Bucket Dig Bucket Anti-Drop Valves E-Stops Located Auckland

Tortella Spike Rotor Hoe 3.0 Meter Working Width 3 Speed Gear Box 150 Hp Gear Box Slip Clutch on PTO Packer Roller Hydraulic Tail Flaps This is a One owner Spike Hoe that has done very little work as per the photos. In excellent working condition.

Used 2013 Kobelco SK75SR-3 7.5t Excavator. A tidy, late model, one owner machine. This Short Radius unit is set up with a Standard Mono Boom, Blade, Steel Tracks with 450mm Grousers, Front Screen Guard, Hyd. Hitch and Dig Bucket. Located Christchurch

Mchale V660 Baler $10,000 spent and ready to go for the coming season Only done 51,000 bales The well established but newly improved McHale V660 baler just got even better. McHale have just released a single belt model of their V660. It uses the same single belt technology that is incorporated into their Fusion Vario, which has been tested worldwide over several seasons. The benefit of the easy to operate V660 to the farmer, is more product in each bale and less leaf loss due to the single belt system. As a result of the design improvements a higher density bale is achieved, there is less air in the bale, resulting in even higher quality feed in consistently shaped bales. The biggest benefit of the single belt system is its ease of operation, as there is only one belt in contact with the crop. The single belt eliminates the risk of the crop ending up in the wrong place due to belt slippage. It allows minimal crop loss and the stability of the belt leads to an easy machine to drive. The single belt combined with further changes in the density system has increased the bale density capacity of these machines. The end result for the baled grass is that with less air and an even higher density achieved, optimum conditions are provided for improving the silage quality of any grass type baled. To provide a high volume pick up in all conditions, design improvements include new large side augers and a 40mm diameter increase in the intake rotor combined with the 2m pick up. The new flex floor allows up to 20mm of downward flex to allow lumps to pass through from the pick up rotor. Combined, these improvements provide an increased intake. The tried and tested hydraulic drop floor system of the Fusion Series remains to lower the floor if a blockage does occur. Included in the technical improvements are the new density valve and the ultrasonic bale shape indicator. Together these design elements lead to the V660s ability to operate at fast speeds, giving the potential for increased production. A cleaning auger is now a standard feature of the V660. Fitted to the secondary drive roller, it eliminates contamination in the bale chamber by reducing build up on the drive roller. It is valuable addition, particularly in heavy and sticky crops. All McHale V6 machines are now fitted with the new hydraulic stretch netter as standard. It allows the net tension to be easily adjusted through the control box in the cab as crop or weather conditions change. The fully automated V660 is easy to operate. Its Expert Plus Control Console allows the operator to control bale characteristics and be alerted to issues from within the cab. The V660s ability to cope with poor rows, lumpy swaths and short wet sticky crop, whilst producing higher density, higher quality, consistently shaped bales is currently meeting the high expectations of McHale loyal customers worldwide.

Kirpy Heavy Duty Auto Reset Ripper These rippers or the strongest tractor mounted ripper available and hard to find used. - 2.5m working width - 7 Legs - Leaf spring auto reset - New hard-faced points - Solid forged legs $19900 +GST

The McHale 991 High Speed sets the pace for efficient and effective round bale wrapping, with the hydraulically operated cut and hold system, reducing wrapping time with its twin dispensers and Patented Ground Supported Damper System. The 991 High Speed delivers tightly wrapped bales which seal and preserve the crop, with all its natural juices, ensuring increased nutritional value. The twin 750mm aluminum dispensers maintain a consistent stretch, which maximises film usage. The dispenser units consist of two aluminium rollers, which are geared to each other with robust steel gears of different ratios. The two dispensers on the 991 High Speed are stepped so that there is an overlap where the two sheets of plastic come together.