Used 2014 Equipment & Trucks For Sale in gore

Used 2014 CASE 885B 20.0t Grader. A very tidy machine with low hours. This unit is well set up with: 14ft Moldboard Rear Rippers with Scarifiers Michelin 17.5-R25 Tyres Front Blade also available (not installed) A full Leica 3D System was installed on this machine in 2022 at a cost of $80,000.00+GST. This is available for an extra $55,000.00+GST over and above the asking price, or can be removed if not required. Located Gore

Amazone ZA-M Profis Has extra extensions of 1000L and 500L Taking to total of 3000 L

Deutz-Fahr Agrotron TTV 630 Low hours and very tidy Engine: EngineDeutz TCD 2012 L6 4V turbocharged inter-cooled diesel 6-cylinder liquid-cooled 369.6 ci [6.1 L] Rated Power (ECE R24):203 hp [151.4 kW] Maximum Power (ECE R24):222 hp [165.5 kW] Rated RPM:2100 Oil change:500 h Standard tires (ag):Front: 480/70R30. Rear: 580/70R42 Optional tires (ag):Front: 600/70R30. Rear: 710/70R38 Front: 600/70R30. Rear: 620/70R42 Front: 540/65R34. Rear: 650/65R42 Front: 600/70R30. Rear: 650/65R42 Deutz-Fahr Agrotron TTV 630 Dimensions Weight:15930 lbs [7225 kg] Wheelbase:110.9 inches [281 cm] Length:189.3 inches [480 cm] Width:107.1 inches [272 cm] Height (cab):124.3 inches [315 cm] Deutz-Fahr Agrotron TTV 630 Power Engine (net):203 hp [151.4 kW] Deutz-Fahr Agrotron TTV 630 Mechanical Chassis:44 MFWD 4WD Differential lock:automatic front and rear differential locks Steering:power Brakes:wet disc Cab:Cab standard with air-conditioning. Mechanical or semi-active pneumatic suspension is optional. Deutz-Fahr Agrotron TTV 630 Hydraulics Type:load sensing Valves:4 to 7 Pump flow:29.1 gpm [110.1 lpm] 42.3 GPM [160.1 lpm] * Steering flow:11.6 GPM [43.9 lpm] Deutz-Fahr Agrotron TTV 630 PTO Rear PTO:independent Clutch:electro-hydraulic wet disc Rear RPM:540/540E/1000/1000E* Front RPM:1000* Engine RPM:1000@1960 1000E@1600 Deutz-Fahr Agrotron TTV 630 3 Point Hitch Rear Type:III/II Control:position and draft control Rear lift:22046 lbs [10000 kg]

Used 2014 TEREX PT50-T Compact Track Loader A tidy machine with good hours. Tracks are in great condition with approximately 80% life remaining. This unit is set up with an Open Cab, Joystick Controls and NORM 4in1 Bucket. Machine Specifications: Engine: Perkins 404D-22T 60Hp Turbo Operating Weight: 2,812 Kg Machine Width: 1,524mm (Bucket 1,600mm) Lift Capacity: 862Kg (50% of Tipping Load) Located Gore

Used 2014 Sumitomo SH210-5 LC 21.0t Digger. A tidy and original, one-owner machine. This unit comes with a Hydraulic Coupler, Rock Bucket, Screen Guard and Track Guards. Located Christchurch

Duals, very low hours excellent examplerEngine rDeutz TCD6.1L06 4V Tier 3B(4i) Diesel EnginerSCR(Selective Catalytic Reduction) AdBlue B100 6 Cyl/6100cc Turbocharged/Intercooled Electronically Controlled Wastegate Turbocharger Liquid/Oil Cooled rCommon Rail DCR Injection Systemr209 hp Rated @ 2100 RPM (ECE 120) 210 hp Max (ECE 120) Constant Power 1600-2100 RPM Torque 880 Nm @1600 RPM 100% Bio Diesel Compliant Engine Speed Programming Powercore Air Filter with Dust Ejectors Side Vertical Exhaust Fuel Tank 300 litres + 35 litres AdBlue Transmission ZF 7200 IRS Series Trans Intelligent Range Shifter Single Lever Operation 40 F / 40 R Speeds 6 Mechanical Ranges 4 Stage Powershift 16 Creep Speeds APS Auto Powershift Speed Matching 5 Stage Shuttle Modulation Four Wheel Drive (FWD) Elec/Hyd Engagement Front & Rear Diff Lock-100% ASM Auto Diff Lock & 4wd Engagement 50 km/h Road speed Wheel Equipment & Miscellaneous Front Axle Suspension Fixed Fully Welded Radial Wheel Equipment 540/65R30 Front 650/65R42 Rear Radar Dynamic Front Fenders 330 Kg Front Weight Frame 10 Front Weights (400kgs) Rear Fender Extensions Additional Work Lights Twin Toolboxes HD Battery Hydraulic Trailer brakes PTO rIndependent Wet Multidisc Clutch NEW Modulated Start up System 4 Speed PTO 540/540E- 1000/1000E Std Speeds @1965 rpm /Eco Speeds@1645 rpm Push Button Control in

Used 2014 CASE 2050M 23.0t Bulldozer. A low hour Bulldozer in great condition. This tractor is well specified with a 3.4m Semi-U Blade, Rear Rippers, Sweeps and Track Guards. Track Chains and Sprockets on this machine was replaced less than 100 hours ago. This unit runs the FPT 6.7L 232Hp engine and Hydrostatic Transmission. This model has industry-leading draw bar pull and great visibility. Hour Meter: 3,730 Hours (Machine still in work, so hours are subject to change)