Equipment & Trucks For Sale from $5,000 to $10,000 in Canterbury

NZs most popular 2 bale feeder Renown Chainless feedout system excellent for rounds and squares No floor chains to wear. Reliable. Quiet operation Twin rotor feedout to make feed go further Top rotor turns 3 x faster than bottom rotor Excellent incab control of feedout out rate Good for trough feeding with rotor wiper panel. Self load with the 3ptl forks LOCATION: INVERCARGILL STOCKNO: UM43356

PTO drive Twin Discs Spreader Up to 21mtr Spread. NZ Tested & Certified 1200ltr capacity (1000kg Urea) Complete with Roll top cover Hydraulic open and shut with independent L/R control Weight 290kg, 2160mm Wide, 1360mm Deep, 1170mm High Great width to fill out of a FEL Bucket Hardly been used, client went to larger capacity bulky spreader LOCATION: INVERCARGILL STOCKNO: UM43259

8 Cubic Metre capacity 4.9m long Single axle 400/60-15.5 Tyres Fully workshop checked LOCATION: CHRISTCHURCH STOCKNO: UM43345

3ptl HD Sprung tyne grubber with lively action for finer finish 7 x Kongskilde VibroFlex tines 150mm wide HD Spring Reversible boiling point Rear Tow Bar Solid sound order. Strong Machine Ideal after Cows Suit 90 to 180hp depending on the depth being worked. LOCATION: INVERCARGILL STOCKNO: UM43076

1.6m x 1.3m x 1.7m 480kg Wide grip Sinlge hydrualic sequencing for simple operation Suited for fitting to any loader or tractor mounted front loader Cut silage, hay and straw bales with ease Removes plastic and net while splitting the bale In good working condition LOCATION: CHRISTCHURCH STOCKNO: UM43309

9 tine model 2.8mtr working width HD goliath spring loaded tines HD reversible points Good clearance between tines Rear drawbar Ideal primary cultivation tool LOCATION: CHRISTCHURCH STOCKNO: UM42957

3m ground drive Spiked aerator Workshop checked Ideal for pugged paddocks and part cultivation levelling LOCATION: INVERCARGILL STOCKNO: UM43281

3pt Linkage Maxitill Cultivator has rugged construction and a well-designed layout giving maximum strength at stress points. The three tyne sections with hinged floating wings allow for contour following and even full ground coverage without ridging. Save time and diesel with fast efficient seed preparation. Lively 32 x 10mm S tynes at 100mm spacing, suited to forward speed of 7 to 15km/hr. 16 ft / 5mtrs wide. 48 tynes in 4 rows Hydraulic folding for transport to 2.3mtrs wide HD flat bar crumble roller with depth adjusters. Knock clods apart and leave fine finish. Overlap at rear for smooth even finish Made in Timaru. These machines are the latest generation of the original Klough Clough design that have been developed to our conditions for decades. LOCATION: INVERCARGILL STOCKNO: UM43403

13 x Heavy Duty 150mm wide HD sprung tynes and solid legs HD Grubber with lively action for finer finish HD reversibles points for good trash burying 3mtr working width to cover the ground fast Suit 100 to 180hp depending on the depth being worked. LOCATION: INVERCARGILL STOCKNO: UM43232

2.0m.working width Belt drive Outside swath disc Been very well maintained Ideal for Grass Seed LOCATION: CHRISTCHURCH STOCKNO: UM43284